Directions: In this section, you are going to read a passage with ten statements attached to it. Each statement contains information given in one of the paragraphs. Identify the paragraph from which the information is derived. You may choose a paragraph more than once. Each paragraph is marked with a letter.

　　长篇阅读

　　Paper--More than Meets the Eye

　　A) We are surrounded by so much paper and card that it is easy to forget just how complex it is. There are many varieties and grades of paper materials, and whilst it is fairly easy to spot the varieties, it is far more difficult to spot the grades.

　　B) It needs to be understood that most paper and card is manufactured for a specific purpose, so that whilst the corn-flake packet may look smart, it is clearly not something destined for the archives. It is made to look good, but only needs a limited life span. It is also much cheaper to manufacture than high grade card.

　　C) Paper can be made from an almost endless variety of cellulose-based material which will include many woods, cottons and grasses or which papyrus is an example and from where we get the word "paper". Many of these are very specialized, but thepreponderance of paper making has been from soft wood and cotton or rags, with the bulk being wood-based.

　　Paper from Wood

　　D) In order to make wood into paper it needs to be broken down into fine strands. Firstly by powerful machinery and then boiled with strong alkalies such as caustic soda, until a fine pulp of cellulose fibers is produced. It is from this pulp that the final product is made, relying on the bonding together of the cellulose into layers. That, in a very small nutshell, is the essence of paper making from wood. However, the reality is rather more complicated. In order to give us our white paper and card, the makers will add bleachand other materials such as china clay and additional chemicals.

　　E) A further problem with wood is that it contains a material that is not cellulose. Something called lignin. This is essential for the tree since it holds the cellulose fibres together, but if it is incorporated into the manufactured paper it presents archivists with a problem. Lignin eventually breaks down and releases acid products into the paper. This will weaken the bond between the cellulose fibers and the paper will become brittle and look rather brown and careworn. We have all seen this in old newspapers and cheap paperback books. It has been estimated that most paper back books will have a life of not greater than fifty years. Not what we need for our archives.

　　F) Since the lignin can be removed from the paper pulp during manufacture, the obvious question is "why is it left in the paper?" The answer lies in the fact that lignin makes up a considerable part of the tree. By leaving the lignin in the pulp a papermaker can increase his paper yield from a tree to some 95%. Removing it means a yield of only 35%. It is clearly uneconomic to remove the lignin for many paper and card applications.

　　G) It also means, of course, that lignin-free paper is going to be more expensive, but that is nevertheless what the archivist must look for in his supplies. There is no point whatsoever in carefully placing our valuable artifacts in paper or card that is going tohasten their demise. Acid is particularly harmful to photographic materials, causing them to fade and is some cases simply vanish!

　　H) So, how do we tell a piece of suitable paper or card from one that is unsuitable? You cannot do it by simply looking, and rather disappointingly, you cannot always rely on the label. "Acid-free" might be true inasmuch as a test on the paper may indicate that it is a neutral material at this time. But lignin can take years before it starts the inevitable process of breaking down, and in the right conditions it will speed up enormously.

　　I) Added to this, as I have indicated earlier, paper may also contain other materials added during manufacture such as bleach, china clay, chemical whiteners and size. This looks like a bleak picture, and it would be but for the fact that there are suppliers who will guarantee the material that they sell. If you want to be absolutely sure that you are storing in, or printing on, the correct material then this is probably the only way.